50
electricity and / or other related to the equipment or sector and as described in the
instruction manual.
A product installation that does not conform to the manufacturer's specifications and /
or does not comply with the legal regulations on this subject will not give rise to the
application of this Warranty. Whenever a product is installed outdoors, it must be
protected against weather effects such as rain and wind. In these cases, it may be
necessary to protect the appliance by means of a cabinet, or a properly ventilated
protective caseAppliances should not be installed in places that contain chemicals in
their atmosphere, in saline or high humidity environments, as mixing them with air
may produce rapid corrosion in the combustion chamber. In this type of environment it
is especially recommended that the appliance be protected with anti-corrosion products
for this purpose, especially during times of operation. As a suggestion it is indicated the
application of graphite greases indicated for high temperatures with function of
lubrication and anti-corrosion protection.
3.10 In equipment belonging to the pellet family, in addition to the daily and weekly
maintenance contained in the instruction manual, it is also obligatory to carry out the
cleaning inside and in the respective chimney for the evacuation of fumes. These tasks
should be carried out every 600-800 kg of pellets consumed, in the case of stoves (air
and water) and compact boilers, and every 2000-3000 kg of pellets consumed in the
case of automatic boilers. In the event that these quantities are not consumed, at least
one systematic preventive maintenance must be carried out annually.
3.11 It is the Buyer's responsibility to ensure that periodic maintenance is carried out,
as indicated in the instruction and handling manuals accompanying the Product.
Whenever requested, it must be proved by submitting the technical report of the entity
responsible for it, or alternatively by registering them in the instruction manual in the
dedicated section.
3.12 In order to avoid damage to the equipment caused by overpressure, safety
elements such as pressure relief valves and / or thermal discharge valves, if applicable,
as well as an expansion vessel fitted to the installation, shall be ensured at the time of
installation and its correct functioning must be ensured. It should be noted that: the
valves referenced must have a value equal to or less than the pressure supported by
Summary of Contents for K50
