7
Close the doors and windows or partition where the fire broke out.
Turn off the power and turn off the gas before leaving your home.
Once outside, you should wait for the firefighters and be ready to give you the
following information: location of the fire, possible materials that are burning
and what they can do to prevent the progression of the fire.
4.
Technical characteristics*
Characteristics
K50
Units
Height
823
mm
Width
450
mm
Depth
549
mm
Diameter of the fume discharge pipe
80
mm
Tank capacity
11
kg
Maximum heating volume
137,5
m³
Maximum overall thermal input
6,1
kW
Minimum thermal input
3,2
kW
Minimum fuel consumption
0,7
kg / h
Maximum fuel consumption
1,36
kg / h
Rated electrical power
89
W
Electrical power at start (<10 min.)
362
W
Rated voltage
230
V
Nominal frequency
50
Hz
Thermal efficiency at rated thermal input
92
%
Thermal efficiency at reduced thermal input
95
%
Maximum gas temperature
123
°C
Temperature min. of gases
66
ºC
CO emissions at nominal thermal power
0,01
%
CO emissions at reduced thermal power
0,04
%
Mass flow of combustion gases
5
g/s
Depression in the chaminé
12
Pa
Table 1 – Technical characteristics
*Tests performed using wood pellets with a calorific value of 4.9 kWh/kg.
The above data were obtained in the product homologation tests in independent and accredited
laboratories, in order to carry out tests on pellet equipment.
Summary of Contents for K50
