70
c) d)
Figure 58 - Cleaning the burner and plate
In the event that fume extraction is not operating under the best
conditions, the extractor should be cleaned as illustrated in Figure 59 and
Figure 60. In any case, it is recommended that this procedure be carried
out at least once a year.
a)
b)
Figure 59 – Remove the screws securing the upper lid, both in the front and back of
the boiler, to access the extractor
Figure 60 – Remove the screws of the extractor and vacuum the air flow area
Summary of Contents for SZM A 18 KW
