42
SOMAport Setup Guide
8
Click
Finish
.
9
Restart your computer.
N O T E :
Do not skip this step.
10
Check your Internet connection.
See
“Activating service” on page 39
To change network settings in Windows 95
1
Select Start
→
Settings
→
Control Panel.
2
Double-click the Network icon.
The Network window opens to the Configuration tab.
3
Select
TCP/IP
.
If multiple TCP/IP connections are listed, select the one that contains
“Ethernet”, “NIC”, or “10/100 MB” in its name. Go to step
If TCP/IP is not listed, go to step
4
Install TCP/IP:
i
Click
Add
.
The Select Network Component Type window opens.
ii
Select
Protocol
from the list.
iii
Click
Add
.
The Select Network Protocol window opens.
iv
Select
Microsoft
from the Manufacturers list.
v
Select
TCP/IP
from the Network Protocols list.
vi
Click
OK
.
vii
Insert the Windows 95 CD or reboot the computer if prompted to do so.
viii
If the PC reboots, repeat steps
, then go to step
5
Check the TCP/IP properties:
i
Click
Properties
.
The TCP/IP Properties window opens to the IP Address tab.
ii
Make sure the
Obtain an IP address automatically
radio button is enabled.
iii
Click the DNS Configuration tab.
iv
Enable the
Disable DNS
radio button.
