7
EN
Copyright © 2010 - 2017 Somfy SAS. All rights reserved.
Images non contractuelles.
1. PRIOR INFORMATION
1.1. FIELD OF APPLICATION
The Setting Cable Kits are designed and should only be used
to adjust and test all types of motorized products, equipped
with Somfy 230 V AC motors.
The Universal Setting Cable Kit is compatible for radio drives and WT drives (cable).
The io HYBRID Setting Cable Kit is compatible for io HYBRID drives.
1.2. LIABILITY
These instructions describe how to install, commission and use this product. Please
read these instructions carefully before installing and using the Setting Cable Kit.
Never install this product without first checking its compatibility with the associated
equipment and accessories.
The Setting Cable Kit must be installed by a motorisation and home automation
professional, according to instructions from Somfy and the regulations applicable
in the country in which it is commissioned.
It is prohibited to use the Setting Cable Kit outside the field of application described
above. Such use, and any failure to comply with the instructions given in this guide,
absolves Somfy of any liability and invalidates the warranty.
If in doubt when installing the Setting Cable Kit, or to obtain additional information,
contact a Somfy adviser or go to the website www.somfy.com.
1.3. SAFETY INSTRUCTIONS
These instructions are
mandatory
for the motorisation and home automation
professional who connect and use the Setting Cable Kit. Failure to follow these
instructions can lead to serious injury.
Reserved for indoor use.
Prior to use, the condition of the Setting Cable Kit has to be checked! Faulty
Setting Cable Kits must not be used.
Remove the mains plug before connecting or disconnecting the drive to
the clamp terminal.
Neutral wire can carry voltage if the mains plug is connected. With the io HYBRID
Setting Cable Kit, neutral and phase wires can carry voltage if the mains plug
is connected.
Don‘t use the Setting Cable Kit for permanent operation of the motorized
product. It has to be removed after completion of adjustment!
Follow the instructions of the respective drive!
Only 1 drive should be connected to the Setting Cable Kit at one time.
Never drop, knock, drill or submerge the Setting Cable Kit.
Keep the product out of reach of children.
