Continued On Next Page
Bracket Installation
You will need to mount solar panel with brackets if glass application is not possible, such as:
panel blocks window movement or casement, double-hung windows or when roll-up cassettes/headrails
inhibit direct-to-glass mounting area.
Window Frame Mounting
1. For inside top of window frame mounting,
position brackets and mark hole locations.
2. Attach brackets to window frame with
screws provided.
3. Snap Solar Panel into brackets.
Head Rail or Roll-Up Cassette Mounting
If this is a new installation, determine whether 2” drop or 4” drop brackets best fit the application.
Ensure that Solar Panel position has direct access to sunlight without blockage or shadows.
If this is an existing installation, remove the window coverings to best determine which brackets fit the
headrail. Ensure position provides unimpeded access to sunlight and does not restrict movement of
window covering.
Vertical or horizontal mounting depends upon window covering type. Cassettes may require vertical
installation, using upper hole locations. Venetian tilt or cord lift head rails may require horizontal installation,
using the lower screw hole.
1. Once vertical or horizontal installation is
determined, use brackets to mark screw
locations.
2. Use self-tapping screws to mount brackets into
position. Be careful not to damage window
coverings during installation.
3. Snap solar panel into proper position in
the brackets.
4. Put window covering back in place.
Horizontal Mount
Vertical Mount
