15
EN
EN
- Replacing the EXAVIA 500 / WISPA 800 / SGS 201SGS 400 / SGS 501 electronic unit - SOMFY
See page 8.
9.4 Adding a 2- or 4-button remote control
9.1 Description of the remote controls
9.2 Possibilities for programming the 2-button remote control
9.3 Possibilities for programming the 4-button remote control
Depending on the choice of settings, Somfy RTS remote controls can control:
•
complete opening of the gate
•
pedestrian opening of the gate
•
another Somfy RTS device (example: garage door motor, roller shutter, etc.)
1
2
3
4
1
2
2-button
remote control
4-button
remote control
Button
1
Button
2
Possibility 1
Complete opening
Pedestrian opening or other Somfy RTS automatism
Possibility 2
Another Somfy RTS device
Complete opening
Button
1
Button
2
Button
3
Button
4
Possibility 1
Complete opening
Pedestrian opening or other
Somfy RTS automatism
Another Somfy RTS
automatism
Another Somfy RTS
automatism
Possibility 2
Another Somfy RTS
automatism
Complete opening
Pedestrian opening or other
Somfy RTS automatism
Another Somfy RTS
automatism
Possibility 3
Another Somfy RTS
automatism
Another Somfy RTS
automatism
Complete opening
Pedestrian opening or other
Somfy RTS automatism
Possibility 4
Another Somfy RTS
automatism
Another Somfy RTS
automatism
Another Somfy RTS
automatism
Complete opening
9.6 Deleting remote controls
9.5 Adding a 3-button remote control
See “Clear the memorised settings and remote ” page 17.
PROGRAMMING THE REMOTE CONTROLS 9
You can memorise up to 16 control points (remote control, other radio control point).
If you memorise a 17th control point, the first point memorised will automatically be deleted.
If you wish to program a pedestrian opening, it must be programmed on the button next to the total opening (e.g.: full opening controlled
by button 2, pedestrian opening controlled by button 3).
It is not possible to programme pedestrian opening on button 1 of the remote controls.
1
2
3
>2s
<0,5s
Press the
button on the control electronics
for 2 seconds.
The indicator light comes on.
Position the new remote control to be
programmed on the control electronics target.
Briefly press a button on the remote control
to be programmed. The RADIO indicator light
will come on then go out when you release the
button on the remote control.
The remote control has been memorised.
