6
Copyright © 2018 SOMFY ACTIVITÉS SA, Société Anonyme. All rights reserved.
EN
2.3.2. Checking the direction of rotation (Fig E)
Move the curtain away from the end limits.
1) Press the
Open
button on the control point:
a) If the motorised product opens (a), the direction of rotation is correct.
b) If the motorised product closes (b), the direction of rotation is incorrect: Move onto the next step.
2) Press the
Open
,
Stop
and
Close
buttons, simultaneously until the motorised product moves
3) Press the
Stop
button, until the motorised product moves, to reverse the rotation direction.
4) Press the
Open
button on the control point to check the direction of rotation.
2.4. TIPS AND RECOMMENDATIONS FOR INSTALLATION
2.4.1. Questions about the Movelite
TM
?
Observations
Possible causes
Solutions
The motorised product does
not operate.
The wiring is incorrect.
Check and reconnect the power supply
The control point is not
compatible.
Check for compatibility and replace the
control point if necessary.
2.4.2. Erasing the memory of the motor (Fig F)
Press and hold the
Open
,
Stop
and
Close
buttons simultaneously until the motorised product moves 3 times.
All the settings are erased.
3.1. OPEN AND CLOSE BUTTONS
(Fig G)
Pressing the Open or Close button fully opens or closes the motorised product.
3.2. STOP FUNCTION
(Fig H)
The motorised product is moving.
Briefly press Stop: the motorised product stops automatically.
3.3. TIPS AND RECOMMENDATIONS FOR USE
3.3.1. Questions about the Movelite
TM
?
If the motorised product still does not work, contact a motorisation and home automation professional.
3. USE AND MAINTENANCE
This drive is maintenance-free
Observations
Possible causes
Solutions
The motorised product
does not operate.
The motorisation is in thermal protection mode.
Wait for the motor to cool down.
4. TECHNICAL DATA
Power supply
100V - 240V
Operating temperature
0°C to + 60°C
Index protection rating
IP 30
Safety level
Class I
