10
CONTENTS
2. NINA TIMER IO REMOTE CONTROL 5
3. USING NINA TIMER IO
Copyright © 2017 - 2021 SOMFY ACTIVITÉS SA, Société Anonyme. All rights reserved.
Base
The Nina Timer io remote control is placed on the base for easy viewing.
The base can also recharge the Nina Timer io battery when the remote control is
placed on it.
To recharge the Nina Timer io battery, see
.
Nina Timer io is in operation when it is placed on its base: the screen is always on.
It goes to the standby screen after 10 seconds of inactivity.
To disable this function, see
Manage the screen status when Nina Timer io is on its base, page 91
.
For an overview of the home screen depending on the position of Nina Timer io, see
Battery
Battery level
The battery level is indicated by a dynamic icon as shown below:
Battery full (>75%)
Battery between 10% and 25%
Battery between 50% and 75%
Battery <10% (flashing)
Battery between 25% and 50%
Battery charging
When the battery level reaches 25%, a warning message is displayed, prompting you to place Nina Timer
io on its base.
When the battery level is between 6% and 10%, another warning message is displayed: the remote
control can only be used if it placed on its base, until the battery level has risen again.
