1. Insert cradle bearing into headrail.
It is recommended that all cradle bearings are positioned in the same direction.
2. Feed the take-up cords through the center holes of the cradle bearings as illustrated below.
Be sure the cord is positioned in relation to the ladder braid.
3. Feed ladder braids through cradle bearings. Outermost holes
accomodate larger width slats, i.e. 2".
D. Cradle Bearing Assembly
Take-up
Cord
See Detail
Headrail
Ladder Braid
Take-up
Cord
Bottom of
Cradle Bearing
Blind
Ladder Braid
Outer holes
for 2" Slats
Inner holes
for 1" Slats
4
