12
Copyright © 2016 Somfy SAS. All rights reserved.
For Connected Home (TaHoma
®
):
• Opening detection
For solutions A or B, put the mode selector in the
Magnet activated position (default position).
The opening and shock detector is now operational.
Opening and shock "learning" mode
This enables the opening and shock detector to recognise:
- an intrusion: opening "learning"
OR
- an intrusion attempt: shock "learning"
Ensure the opening element has been closed.
Then all that is required are the following 3 steps:
1) Press the calibration button (C) and hold for
3 seconds.
2) The red indicator light will light up for 10 seconds: close the
unit cover whilst the light is on.
3) The red indicator light will blink rapidly: this is the learning
step.
- Opening "learning": open the window/door normally.
OR
- Shock "learning": force/shake the door/window to simulate
an intrusion attempt.
If there is an error, the red indicator light will blink twice
every five seconds. Return to step 1.
C
P
C
P
C
P
C
P
C
P
C
P
Summary of Contents for TaHoma +
Page 75: ......
