Check the scope of delivery for completeness and damage.
RJ45CFXL-P1
RJ45 ONESIZE Buchse CAT5-7, 10GBit
Assembly and operating instructions
AUDIO VIDEO BROADCAST MULTIMEDIA HIFI
2
T
echnical specification subject to change.
Follow the direction
instruction on termination
cap and place the
termination cap onto
jack properly.
3.
Secure the hinged
flaps by closing the flaps
completely until they
catch.
4.
5.
Fasten a cable tie wrap to secure
the cable fixture. If neccesary cut
the excess drain wire / screen
without damaging the cable jacket.
1.6"
Cable Fixture
White/Orange
Orange
White/Green
Green
White/Green
Green
Blue
White/Blue
White/Orange
Orange
White/Brown
Brown
JACK PIN DESIGNA
TIONS
1
2
3
6
4
5
7
8
TIA / EIA
T568B
TIA / EIA
T568A
Cable Tie
Insert the conductors until stop
into termination cap and fan out
all four twisted pairs. Following
the color coding printed on termi
nation cap, position conductors
into the slots and make sure the
conductors are in the proper
slots. Cut the ends of exceeding
conductors close to the termina
tion cap.
2.
Strip off 1.6 inch (4 cm) of
cable jacket. Fold back the
drain wire / screen.
When using an AWG22 cable
with a pair shield, leave the
pair shield 0.15 inch (4 mm).
1.
AWG22 (> 0.29 inch Ø /
> 7,4 mm Ø)
Distributed by
©2019 Sommer cable GmbH All rights reserved
