SAFETY INSTRUCTIONS
Page 10
WARNING
Risk of injury due to dust!
Ensure good supply and exhaust ventilation of the workplace.
Wear the prescribed dust mask/air filter mask if required.
WARNING
Risks of damage to the machine!
Attach the machine at operation height.
Do not firmly attach hopper enlargements (e.g., avoid welding on).
In case of feeding from a silo: Allow the silo outlet to protrude by 1-2 cm into the hopper of
the grain crusher. It must be possible to pull the grain crusher out from below the silo.
When using feed wagons/catchment containers, maintain a short distance to the machine
outlet; otherwise the milled material might drop out next to the catchment container.
CAUTION
Risk of injury during filling
Filling of materials for rolling goods from sacks into the grain crusher may cause back injuries
due to incorrect lifting techniques due to lifting heavy loads.
Pay attention to correct lifting techniques when lifting heavy loads.
NOTE
Pollution!
Dispose of replaced parts, consumables and auxiliary materials in a safe and
environmentally friendly manner.
NOTE
Possible damage due to rain and moisture!
Do not set up the machine outdoors without rain and moisture protection. There is a risk
of very serious damage to the electrical components and bearings.
NOTE
Extended periods of operation in the wrong direction of rotation!
Extended periods of machine operation in the wrong direction of rotation, especially under
load (milling materials on the rollers) can cause damage to the machine.
NOTE
Use only original spare parts.
Only use materials and original spare parts recommended by the manufacturer.
