SAFETY INSTRUCTIONS
Page 7
2
Risk of drawing in, crushing.
2.3
Safety guidelines
DANGER
Risk to persons and the machine!
Only qualified and authorised persons are permitted to operate the machine.
Only qualified and authorised persons are permitted to operate the machine.
Maintain all safety and hazard instructions at and on the machine in a complete and
legible condition!
Always exercise care and attention in the entire work area of the machine.
Exercise great care when carrying out setup and troubleshooting work requiring the
disabling of safety equipment and/or covers.
Dismantled safety equipment must be refitted after completing the work.
Avoid any unsafe methods of working.
Keep the operating manual available at the machine site at all times.
The machine's operator must have read and understood the Operating Instructions.
Stop the machine immediately and report the fault to the responsible department/person
when safety-relevant modifications are made to the machine line or the operating
behaviour of the machine changes!
Stop the machine immediately and report the fault to the appropriate office/person if
safety-relevant modifications have been made or the operating behaviour of the machine
changes!
The applicable worker's compensation association (BG) rules for Occupational Safety and
Health.
Do not remove or modify safety devices and warning signs from the machine.
Do not convert machine components without our approval.
Access to the workplace on the machine is not permitted for unauthorised persons.
Always exercise care and attention in the entire work area of the machine.
RISKS
Risk of electric shock!
Leave the danger area immediately if electricity leaks to defective components and wiring.
Only have electrical systems installed on machine components by an expert and
according to the wiring diagram.
To protect the machine the power supply must be protected with a residual current circuit
breaker provided by the customer.
RISKS
