-142-
The following window will open:
fig. 7-66: EDF Export Channels
In the upper section of the window, Patient Name, Date of Birth, Starting Time of Recording as well as
the Number of Channels to be exported will be displayed. In the lower section of the window, add all
required channels by activating the corresponding checkbox. Clicking on
Settings
next to each
channel will open the following window:
fig. 7-67:
EDF Export Settings for Channel “EEG”
The settings of the chosen channel (Name, Dimension, Physical and Digital Minimum/Maximum as
well as Pre-filtering) are displayed. The Name of the Channel, Transducer Type (for example
Reference, etc.) can be changed and the physical minimum and maximum dimensions or scaling can
be set. Click on the button
OK
to confirm and return to fig. 7-67.
?
= There is no EDF+
name assigned to the
channel.
v
= There is an EDF+ name
assigned to the channel
from the translation
table.
= An EDF+ name was
manually assigned to
the channel.
Save As Template
Delete Template
Summary of Contents for SOMNOwatch plus
