CLEANING, MAINTENANCE
In order to ensure optimum functioning, the unit may require cleaning at least once a month, depending on the manner of use and
degree of contamination.
1. Switch off and power off the unit by unplugging it from the electric outlet prior to cleaning.
2. Allow the appliance to cool (for at least 30 minutes).
3. Use a vacuum cleaner to clean the protective grid. The reflector does not require cleaning.
4. Use a slightly moistened cloth to clean the unit’s exterior. Do not use any aggressive cleaners. Avoid getting water inside of and on
the electric components of the appliance.
TROUBLESHOOTING
Malfunction
Possible solution
The appliance does not heat in heating mode
Check the power supply
Check the position of the switches
The heating element may have burned out.
Contact the manufacturer’s service center.
Waste equipment must be collected and disposed separately from household waste because it may contain components
hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or
at any distributor which sells equipment of identical nature and function. Dispose of the product at a facility specializing in the
collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you
have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufac
-
turer as prescribed in the relevant regulations and shall bear any associated costs arising.
SPECIFICATIONS
power supply:
230 V / 50 Hz
output:
650 W / 1350 W / max. 2000 W
IP protection:
IPX4: Protected against splashing water (from all directions).
dimensions of heater:
∅
D50 x 177-205 cm
weight of the appliance:
8 kg
length of power cable:
1,8 m
