22
EN -Functions / H - Funkciók / SK - Funkcie / RO - Funcţii / SRB-MNE - Funkcije / CZ - Funkce /
DESKTOP RETRO RADIO
• 4in1: BT + MP3 + AUX + RADIO • Wireless BT connection • Stereo music playback from mobile device, computer • Controls
your mobile phone’s music player • MP3 playback from USB/microSD device • 4-band AM-FM-SW1-SW2 radio • EQ equalizer
• Wire stereo audio input (AUX IN) • Headphone connector socket (3,5 mm) • Classic wooden sound box with two speakers •
Remote control for the multimedia functions (with CR2025 button cell) • Expected charging time / operation time:
~
8 / 16 hours
• Versatile power supply: accessory power cable for charging, built-in accumulator, 6xD/LR20 (1,5 V) batteries (not included),
external 9…12 V
adapter or accumulator (not included)
INSTALLATION, POWER SUPPLY
push switch (
20.
)
BATT:
operation from
6xD (1,5 V) batteries
ACC/DC:
operation from the built-in accumulator
or charging from electrical network
The device has four different power supply options. Can be used from the built-in accumulator – after it is charged. In case of depletion, plug the supplied
connection cable to the backside socket, then to electrical network. Then you can listen to it from electrical network, meanwhile the accumulator is
charging. Unplug the wire from electrical network and the device as well, after maximum 8 hours. Overcharging may shorten the accumulator’s lifetime.
Expectedly, operation time is approx. 14-16 hours from built-in accumulator, which is depending on the set volume, selected function and external
conditions (e.g. the temperature).
In addition, you can operate it with 6xD (LR20 / 1,5 V) batteries or with a 9 V
adapter or 12 V
solar panel, or external accumulator – available
separately – connected to the backside socket (19.).
• Before using it for the first time, charge for 4-6 hours the – partly charged – accumulator with the supplied power connection cable. Charging is slower,
if during you are listening to the device.
• Later do not charge it longer than 8-9 hours, even in case of total depletion! After the given time, unplug the wire from the electrical network and from the
device as well. If you do not remove the charger cable from the radio – only from the electrical network – the radio won’t work due to security reasons.
• Even when it is out of use, it is recommended to recharge the accumulator in 1-2 months to reach a longer lifetime. If it depletes during use, recharge
it immediately!
• Insert the 6xD batteries into the battery holder according to the polarity indicated there. If you use it from batteries, they are not charging neither from
the charging cable, neither by using the external 9-12 Volt power supply. It is not recommended to use same (D) size accumulators instead of the
batteries. In case of battery mode, do not connect the power cable to the device.
• The 6xD batteries can charge the factory built-in accumulator without connecting the power cable.
• Decreasing volume or distorted sound indicates the depletion of the batteries or the accumulator. Charge up the accumulator, immediately remove the
depleted batteries!
• Simultaneously do not use together differently manufactured or different-condition batteries. Battery replacement can only be done by an adult!
• If there is some liquid flown out from the battery, take a protective glove and clean the battery holder with a dry cloth! It is forbidden to open, throw into
fire or short circuit the batteries! The non-rechargeable batteries must not be charged! Risk of explosion! Do not put batteries instead of accumulators
because their voltage and efficiency are significantly smaller!!
SELECT FUNCTIONS
Turn on the device with the (
2.
)
FUNCTION
switch and select the desired function.
OFF
: turned off /
AUX:
3,5 mm stereo audio input on the backside
(
17.
) /
RADIO:
AM-FM-SW1-SW2 wave bands (
13.
) /
USB-TF-BT:
MP3 / BT functions
AUX STEREO AUDIO INPUT
If you have a device that has a 3,5 mm audio output or headphone connector, then you can listen to it through the speakers of this radio. Connect the
AUX IN
(
17.
) input with the other device’s audio output. Set the function switch to (
2.
)
AUX
position. If you have a device that has a 3.5 mm audio output
or headphone jack, you can listen to it through the speakers in this radio. Connect the AUX IN (17.) input to the audio output of the other device. Set
the slide switch (2) to the AUX position.
• The available audio quality depends on the quality of the audio signal provided by the external device.
• Adjusting the external device’s volume- and tone-control greatly influences the sound.
USING THE RADIO
Select the wave band with
BAND
(
13.
) switch. In case of FM and SW1-SW2 band, unplug carefully the antenna and set it to the best reception. Tune
the desired radio station with
TUNING
(
12.
) rotary knob.
• While listening to AM band, the built in antenna will work. Do not pull out the antenna, but turn the whole product to the best positon of reception.
• Reception ability of the radio significantly depends on the place of use and the actual reception conditions.
• Handle the antenna carefully, so as not to break it!
• Electric devices located nearby may disturb the reception!
MP3 PLAYBACK (from USB/microSD device)
Select the
USB/TF/BT
mode with the
FUNCTION
(
2.
) switch. Insert carefully the device containing the MP3 songs and playback starts automatically.
You can select the desired soundtrack with the play-pause (
7.
) and step (
8.
) (
9.
) buttons. By keeping pressed one of the step forward or step back
buttons, you can search within the song If there is a USB and microSD data storage connected simultaneously, then with
MODE
button (11.) you can
choose between them.
