10
EN -Functions / H - Funkciók / SK - Funkcie / RO - Funcţii / SRB-MNE - Funkcije /
CZ - Funkce /HR-BIH - Funkcije
JOBSITE AND PARTY RADIO
FEATURES
For outdoor and indoor use ● Ideal multimedia besides work, in the garden, on the beach ● Rear, white light LED lamp ● Wireless BT connection ● Listen
to music from your mobile device, computer ● MP3 playback from USB device ● FM radio, with telescopic antenna ● Microphone input, KARAOKE function
(6,3mm) ● Wired audio AUX input (3,5mm) ● Built-in battery with automatic charging ● Charge status on the display and charging indicator LED ● Extremely
long operating time on a single charge ● Expected charging/operating time: 9h / 30h ● Continuous, colorful LED light effect ● Massive, water resistant and
shockproof ● IPX5: can resist water jets, from any direction ● Wideband speaker, 25W ● Accessory: microUSB charger cable (~1,0m), 3,5/3,5mm audio cable
(~0,6m) ● Dimensions: 400x290x170mm/2,2kg
USE
This device is designed for outdoor and indoor use. Increased resistance to moisture, water and shock. Ideal for use while working, but also a useful companion for garden
party and other outdoor programs. In addition to radio, BT, USB music player and karaoke functions, it also has a built-in LED lamp. External devices such as: mobile
phone, computer, CD / DVD player, musical instrument, microphone can be connected directly to the AUX and MIC inputs… Its built-in battery allows it to be operated
for a long time without mains voltage.
POWER SUPPLY, CHARGING THE ACCUMULATOR
The battery must be charged before first use. Connect the supplied microUSB connection cable to the socket under the rubber cover and the other end to a USB adapter,
mobile charger, computer or other device with a USB socket.
Leave the loudspeaker switched off. During charging - next to the volume control - a small red LED lights up, which goes out after full charging. Then unplug the power
cord and use the device. When the battery is completely discharged, the charging time is approximately 9 hours. This provides approx. 30 hours of operation from the
internal battery at medium volume. This also depends on the volume set, the mode selected and the ambient temperature. The test was performed by listening to the
radio at room temperature. It can also be charged during use, but this increases charging time and can cause additional noise. The test was performed by listening to the
radio at room temperature. It can also be charged during use, but this increases charging time and can cause additional noise.
„
LO
” appearing on the display and the ”Low battery, please charge” announcement warns to charge. This is also indicated by the declining volume and poorer sound
quality.
•
Switch off and unplug the charging cable after charging and use.
• Only leave connected after a full charge if the device is running continuously. Charging may occasionally cause noise in the speakers and degrade the quality of radio
reception. This device is designed to be used with a battery, it is recommended to recharge it after use.
• The automatic battery charger works when the device is switched off. Therefore, disconnect the charging cable after charging is complete.
• Charge status indicator: when switched on, the battery symbol on the right side of the display shows the battery status. This symbol changes towards the end of the
operating time.
• For longer life, keep the battery charged, even when not in use.
• The battery used is a lithium-ion type. It requires no maintenance. At the end of its service life, it can be replaced by a specialist after removing the control panel. The
cover is fixed with screws.
INSTALLATION
Make all connections (AUX, MIC) when the device is switched off and the external devices to be connected must also be switched off. Make sure that the connections
and polarity of the connectors are correct. Keep the microphone cable and audio connection cable away from the power cords.
Turn on with the rotary knob on the right, then increase the volume slightly. After the
HI
greeting, the wireless BT switches to connection mode. If you have previously
paired an external BT device with it - and it is nearby - the connection will be made automatically.
FUNCTION CHANGE
The function to be operated can be selected by pressing the
MODE
button:
BT-USB-FM-AUX-BT…
Available multimedia functions: wireless BT connection, USB MP3 player, FM radio, AUX (LINE) audio input, external microphone input.
•
USB and / or AUX mode cannot be selected if no data storage is connected with songs and / or external audio device with a 3.5 mm plug.
• The various functions are indicated by an English voice announcement.
• When used outdoors or in a dusty, humid place indoors, keep the rubber cover carefully closed.
THE MAXIMUM VOLUME
Every speaker must be eased into working before proper usage. In the first 30-50 operation hours it should only run at 50% capacity! At higher volume levels – in some
cases – there may be distorted, low-quality sound. This can be caused by the too large input signal. To avoid this, reduce the signal level of the particular external
equipment or if necessary the main volume (
VOLUME
). The system’s maximum volume is that which can still be heard without distortions.
•
By further increasing the volume, there is no increase in output power, or even the distortion of the system increases! This is harmful to the loudspeaker and may cause
malfunction!
• When connecting a microphone, place it as far away from the speaker box as possible to prevent excitation. Do not point the speaker at the microphone, as excitation
may damage the speaker. When using a microphone, carefully increase the volume, and if you experience excitation, immediately rewind the control and, if necessary,
move the speaker to another position.
WIRELESS BT CONNECTION
The device can be paired to other devices with BT protocol within a range of up to 10 meters. After that, you can listen to music played on mobile phone, tablet, notebook
and other similar devices hands-free. Select
BT
function with the
MODE
button. Search for the speakers nearby including this speaker, the way it’s written in the
instruction manual of the device to be paired. Connect the two devices together. After successful connection, the
BT
indicator flashing until then can be read continuously
on the display. Thereafter, the desired program can be heard from the speaker in good quality. The player device (e.g. the mobile phone) can usually be remotely
controlled by pressing briefly the
/ /
buttons.
If you receive a call on your phone in the meantime, the music will pause. Answer the call as usual with your phone, and after the conversation ends, you can resume
playing music. You cannot listen to the telephone conversation on the radio.
• You can adjust the sound to suit your needs with the equalizer application installed on your mobile phone. Also make sure that the multimedia volume control on your
phone is set correctly. Low levels can cause more noise, too high levels can cause distortion. The setting must be made in accordance with the speaker volume control.
• A speaker can be paired with one BT device at the same time.
• If your phone asks for a password during pairing, enter “0000”.
