5
7. Connect the adapter to a standard 230 V~/50 Hz earth protected wall socket.
8. Now the unit is ready for operation!
CLEANING
If hard water is used, scaling will deposit in the water tank and on the parts of the device exposed
to water. Scaling deposits on the atomizer inhibit normal operation.
Empty the tank and refill every third day. Before refilling, clean it with fresh tap water. Remove
the limescale, deposits, or film that has formed on the sides of the tank or on interior surfaces,
and wipe all surfaces dry.
We recommend that
1. Use distilled water.
2. Clean the water tank and oscillator weekly.
3. Frequently change the water.
4. If it is not used for a long time, clean the entire appliance and store it dry.
Cleaning the water tank, descaling
1. Turn off the humidifier, then discontinue the power supply by unplugging the connection plug.
2. With slightly vinegar water (1 tablespoonful of vinegar in 1 cup of water), rinse the water tank
and then with clean water.
Cleaning the oscillator, descaling
1. Turn off the humidifier, then disconnect from the power supply by unplugging the connection
plug.
2. Drop 5-10 drops of vinegar into the oscillator, wait 2 to 5 minutes
3. Apply with soft material, e.g. clean the oscillator surface with a cleaner.
4. Rinse with clean water.
TROUBLESHOOTING
Problem
Possible solution
Humidification does not work.
Fill distilled water into the tank.
Check the mains power supply.
Humidification is insufficient.
Decrease the water level in the tank.
Clean the oscillator.
All settings are correct, but the device
does not diffuse mist.
Remove the cover, clean the device at
the nozzles and replace the cover.
