6
THE REMOTE CONTROLL
IS NOT A TOY. KEEP OUT OF REACH OF CHILDREN.
THIS PRODUCT INCLUDES A BUTTON BATTERY. IT IS FORBIDDEN TO SWALLOW THE
BATTERY, RISK OF CHEMICAL BURN. IN CASE OF INGESTION, IT MAY CAUSE STRONG
INTERNAL BURN WITHIN 2 HOURS AND MAY LEAD TO DEATH. KEEP THE NEW AND USED
BATTERIES OUT OF REACH OF CHILDREN. IF THE COVER OF THE BATTERY COMPARTMENT
CANNOT GET CLOSED SECURELY, DO NOT CONTINUE TO USE THE PRODUCT AND KEEP IT
AWAY FROM CHILDREN. IF YOU THINK THAT A BATTERY HAS BEEN SWALLOWED OR GOT
INTO ANY BODY PARTS, SEEK MEDICAL ATTENTION IMMEDIATELY.
COMMISSIONING
1. Before installation, carefully remove packaging, and make sure not to damage the unit or the connecting cable.
If you find any damage, the unit must not be operated!
2. Take out the unit from the box.
3. To ensure proper operation, you have to arrange for the free circulation of hot air. Therefore, please, observe
the minimum clearances indicated in
Figure 2.
Warning!
The appliance must be mounted on a wall in such a way that the lowest towel rail is at least 600 mm
away from the ground, so that children cannot climb on it!
4. Review
Figure 3
and make holes in the wall appropriate to the size of the dowels you want to use, or the ones
supplied. The holes should be located at a distance of 446 mm horizontally and 775 mm vertically from each other.
5. Fix the wall mounted part of the supplied 4 bracket pairs (7) to the wall. When installing, take care that the
screw hole on the side of the wall mounted bracket must align with the slot cut in the side of the bracket mounted
on the unit.
6. Fix the other members of the bracket pairs to the back of the appliance using the supplied screws (8). When
fixing, take care that the slots on the side of the brackets mounted on the unit must align with the screw holes on
the side of the wall bracket.
7. Attach the unit to the wall, then secure the brackets with 1 screw each. If necessary, you can position the wall
mounted product by gently loosening these screws.
8. If practicable, fix the wall bracket of the remote controller holder on the wall using the supplied screws and dowels.
9. Insert two 1.5 V (AAA) batteries into the remote controller. Make sure to insert the batteries observing the
correct polarity.
10. Plug the unit into a standard grounded wall socket. Now the unit is ready for operation!
CLEANING
In order to ensure optimum functioning, the appliance may require cleaning at least once a month, depending on
the manner of use and degree of contamination.
1. Switch off and power off the appliance by unplugging it from the electric outlet before cleaning.
2. Allow the appliance to cool down (for at least 30 minutes).
3. Use a slightly moistened cloth to clean the appliance’s outer surface. Do not use any
aggressive cleaners. Avoid getting water inside of and on the electric components of the appliance!
TROUBLESHOOTING
Malfunction
Possible solution
The appliance is not working in heating stages.
Check the power supply.
Check the thermostat settings.
Overheating protection may have activated.
The overheating protection activates frequently.
Clean the appliance.
