3
• Before using it, always make sure that the device is free of damage and it is in perfect condition. Damaged parts can
cause accidents and injuries. Never use a damaged device.
• Check that all parts are properly assembled. Damaged parts can cause accidents and injuries. Any alteration of the
device is prohibited.
• When using the device, always focus on working being done. Even a moment of inattention can lead to serious injuries.
• When transporting or storing the device, make sure that no staples remain in it.
• When moving or relocating the device, keep your fingers away from the actuating lever.
• Always keep your body parts (hands, feet, etc.) away from the shooting direction, and always make sure beforehand that
any staples that may pass through the workpiece will not cause injury in this way.
• When using the stapler, be aware that shooting staples may cause injury.
• The device is not designed to shoot staples in hard surfaces (such as steel or concrete).
• When loading or unloading the device, be aware that the staples are sharp and can cause injury.
• Always check the staples for breakage or defects before use.
• Always use the device on a solid, balanced, safe work platform.
• Always clearly mark your work area, when pedestrian traffic is expected in it.
• Always make sure that the staples punch through the material, and that there is no chance that the staples can shoot in
the direction of the user or anyone else present.
• When using the device, make sure that you maintain a correct, firm and safe position. Always be prepared to counteract
sudden movements and kickbacks of the device.
• Be careful when using the device in an environment where there is a risk of slipping or tripping.
• Caution! The device is not electrically insulated. Use utmost care if there may be hidden hazards in the stapled area, such
as electrical wiring or other power lines.
• Do not use the device in explosive environments.
Staples:
The precision parts of the device are suitable for the following commercially available staples and nails:
1. impact strength adjustment screw
2. actuating lever
3. magazine slider
4. hook
5. lower loading bay
6. side wings
7. eject opening
