background image

Furthermore, the installer must comply with standards and legislation in the country in 
which the product is being installed, and inform their customers of the operating and 
maintenance conditions of the product. They must give them this guide. Any use outside 
the sphere of application defined by SONA is forbidden. Doing so will void the warranty 
and release SONA of all its liability, as would a failure to comply with the instructions 
given herein. Never begin installing without first checking the compatibility of this 
product with associated equipment and accessories.

Warning: 

Read the instruction guide to become familiar with the features of this product 

(Blind & Fittings) before operating it. Failure to operate and fit this product in a safe 
and responsible manner could result in damage to the product, personal property and 
cause serious injury. A qualified electrician / professional is needed for full installation. 
Furthermore, the installer must comply with standards and legislation in the country 
in which the product is being installed, and inform their customers of the operating 
and maintenance conditions of the product. They must give them this guide. Any use 
outside the sphere of application defined by SONA is forbidden. Doing so will void 
the warranty and release SONA of all its liability, as would a failure to comply with the 
instructions given herein. Never begin installing without first checking the compatibility 
of this product with associated equipment and accessories. This product is not intended 
for use by children. Do not install it with small children or pets around. Do not use this 
product externally or in wet / moist conditions. It should be used only indoors in a dry 
suitable environment. Keep the Handset out of reach of children. Never drop, knock, 
puncture or immerse the Handset in liquid. It is essential to read and follow all of the 
instructions and warnings in this fitting guide prior to assembly and setup or use, in 
order to operate the product correctly and avoid damage or serious injury. The imagery 
used are indicative of style only and are not contractually binding. The document and its 
contents remain property of Copyright © 2021 SONA SHADES LTD.

SAFETY & LIABILITY

FI

TTING

 GUIDE

SONASHADES.COM

13

SonaS

ky Mot

orised Blind

Summary of Contents for SonaSky















Reviews: