ZT09 Long Life Tracker User Manual
Web: www.sonaltrack.com
Email: sales@sonaltrack.com
Ph: 8613857402537
4.3 Light-Detected Alarm Description
Place the device in a dark place for more than 60S. When the device detect
light from the device window for more than 1S, it will trigger a light-detected
alarm, (sometimes call removal alarm)
1
ALARMMODE,L1/L0
L1: Light-Detected Alarm: Enable [default]
L0: Light-Detected Alarm: Disable
4.4 Vehicle Collision Alarm Parameter setting
Use to adjust parameters according to actual installation and use.
1
GSENCOL, V, T, C #
Used to set the sensitivity of collision alarm.
Default: 32/2/3
V = 1-255, the higher value, the less sensitive.
T = 0-11, the time V keeps.
C = 0-3, the number of interrupts
Different vehicles have different parameters. It is
recommended to set the parameters as follows:
Motorcycle: GSENCOL, 128,3,3 #
Car: GSENCOL, 48,3,3 #
.
4.5 Vehicle Acceleration / Deceleration and Sharp Turn Parameter setting
1
Driving habits algorithm
selection:
GPSGSE, <A> instruction
1. When A = 1, use GPS to calculate rapid
acceleration, rapid deceleration, and sharp turns
2. When A = 0, use G-sesnor to calculate rapid
acceleration, rapid deceleration, and sharp turns
Default: A = 1
When GPSGSE, 1 #, the following settings about angle increment and speed
increment are valid
