PM
AM
Reset
Pressing by 15 seconds the key deletes the custom settings
of the parameters and return to the factory settings.
Frost protection
The control does not allow the temperature drops below the
limit temperature that supports the installation just before the
water pipes from freezing. It is a fixed setting and is from the
factory at 5°C.
ESC
Digits
The displays shows with the big digits for the reading for ambient
temperature and in smaller digits the temperature setpoint or
current time.
9
Energy Control
Display information
Shown on display when the control is in the process of coding
between sender and receiver (see page 14) and disappears
when the process is complete.
Coding Emitter-receiver
PM
AM
KWh
MWh
RESET
15 s
