O K
ESC
MENU
Display
Location for 1.5V LR03
alkaline batteries
Acces cover to
keyboard & batteries
Keyboard
Description
2
Energy Control
Emitter
Surface Receiver
Forced manual button, turns on and off relay checking the
operation of the installation
Wire connectors for electrical connection of the receiver
(only by qualified personnel & according to the diagram)
It is a digital thermostat heating for residential use batteries, and radio communication (wireless) in which
there are 2 different programs, through the system of periods (blocks) of days:
P5-2:
in which has 6 changes (time and temperature), Monday through Friday and 6 more changes for the
weekend.
P-7:
The six changes are made equal to every day, Monday to Sunday.
Factory programming are preset, you can change these settings with the time and desired temperature. It
can also operate in manual mode, setting only the temperature control.
Note: Emitter and receiver are not encoded from factory, see how to do it on page 12.
Manual mode button
and on / off forced
Down key value in
setting
Key to cancel and delete the
user settings back to factory
defaults
Up key value in setting
Key to confirm setting,
enter set the clock and
temperature units
RESET
15 s
CLOCK
3 s
ON / OFF
5 s
Red LED on - plugged in
Red LED off - unplugged
Green LED on - relay status on
Green LED off - relay status off
Green LED flashing - change in the relay state
Orange LED on - has communication with the emitter
Orange LED off - has no communication with the emitter
Orange LED flashing - receiving an change
