CMP-400 – USER MANUAL
46
press the
RANGE
button - t
he “Auto Range” display indicator
will turn off,
press the
RANGE
button to step through the available ranges
until you select the range you want,
press and hold the
RANGE
button for 2 seconds to exit the
ManualRanging mode and return to AutoRanging.
6.2
Relative mode
Press
REL
button to enter the relative mode, the
REL
indicator
turns on, zero the display, and stores the displayed reading as a
reference value.
In the relative mode, the value shown on the LCD is always the
difference between the stored reference value and the present
reading. For example, if the reference value is 24,00V and the pre-
sent reading is 12,50V, the display will indicate -11,50V. If the new
reading is the same as the reference value, the display will be zero.
Press the
REL
button again to exit the relative mode.
6.3
DATA HOLD Function and Backlight
display
To freeze the LCD meter reading, press the
HOLD
button. The
data hold button is located on the left side of the meter (top button).
While data hold is active, the
HOLD
display icon appears on the
LCD. Press the data hold button again to return to normal
operation.
Press and hold the
HOLD
button key for more than 2 seconds
to turn on the backlight. This will also activate the Data Hold
function. To release the Data Hold function and return the tester to
normal operation, press the
HOLD
button momentarily. To turn off
the backlight, press and hold the
HOLD
button for more than 2
seconds.
6.4
MODE button
The MODE button is used for DC/ACV or OHM/Diode/Conti-
nuity selection.
Summary of Contents for CMP-400
