USER MANUAL
45
NOTE!
In order to maintain the proper parameters of the batteries, charging of unused
batteries should be repeated every 3 months.
4.10.5 General rules of using Lithium (Li-On) batteries.
If the device is unused for an extended period, remove the battery and store it separately.
The battery stored in state of deep discharge can get permanently damaged.
The battery should be stored in dry, cool and well-ventilated place and it should be pro-
tected from exposure to direct sunlight. If the battery is stored for an extended period at a
location with high temperature in it, then the chemical processes occuring within it may
shorten its expected life span.
Do not charge and use Li-On batteries in extreme temperatures (
don’t overheat and dont
expose the batteries to very low temperatures). Extreme temperatures decrease battery
life. Avoid placing devices powered with rechargeable batteries in very warm/hot places.
Their nominal working temperature must be strictly observed.
Li-Ion batteries are vulnerable to mechanical damages. Such damages can contribute to
permanent damage of those type of batteries, and thus the ignition. Any interference in
the structure of the battery may lead to its damage. Shorting poles (+ and -) of the battery
may cause permanent damage and auto-ignition of the battery.
Do not immerse the Li-Ion batteries in liquids, do not store them in conditions of high hu-
midity.
In case the electrolyte, that is filling the inside of the Li-Ion battery, makes direct contact
with eyes or skin, rinse them with a large amount of water and contact your doctor imme-
diately. The battery should be used in a way, that makes it beyond access for random
people. Keep it away from children.
Whenever any changes in Li-Ion battery is observed (different color, swelling, excessive
temperature), it must cease to be used. Mechanically damaged, overcharged or deeply
discharged batteries are not suitable for use.
4.11 Installing camera driver
4.11.1 Hardware requirements
Operating system: Microsoft
®
Windows XP or higher (recommended Win7 or higher)
Processor: Pentium 4 2.4GHz or higher
RAM: at least 512M
Summary of Contents for KT-145
Page 1: ...USER MANUAL THERMAL IMAGERS KT 80 and KT 145...
Page 2: ......
Page 58: ...THERMAL IMAGER SONEL KT 80 and KT 145 56 NOTES...
