KT-160 USER MANUAL
91
The selection is made using buttons
and
), corresponding to the choice of
"Uflash" or "SD Card". Selecting "SD Card" in the absence of the card in the camera's
card slot, (14) results in displaying the message "No SD card". Pressing
button or the
trigger button (10) results in the camera exiting the current setting without saving changes.
After selecting the "SD Card" (if the cared is in the camera), you can select the "Standard"
mode (all files will be saved in a folder) the "Folder" mode
In the "Folder" mode, you can choose where to save files on the SD card:
Remarks:
- Once SD card is inserted into the slot (14), the camera automatically switches its
memory to SD card.
- The camera may use a SD card with a storage capacity up to 2GB.
- Built-in Uflash memory (150MB) allows the user to store up to 120 images.
- “Folder1”, “Folder2”,... correspond to the folders on the card named “PICTURE1”,
“PICTURE2”, etc. In Standard mode the files are saved in the "PICTURE" folder.
- SD Card must be in the FAT32 format.
3.10.4 Help
Select "Help" to display abbreviated reference guide, containing basic information related
to the camera operation
3.10.5 Information about hardware and software version
Select "Info" to display information about camera's hardware and software version at the
top of the screen.
