KT-
560 ● KT-650 ● KT-670 – USER MANUAL
40
The influence
of the distance
from the object on the measurement accuracy may be significant, de-
pending on the medium in which the object is located (air, fog, smoke ...) and its impact on the atten-
uation of thermal radiation. It is possible to adjust this value.
Relative humidity
may also influence the accuracy of measurement, it is possible to change the default
value fo
r any value from the range of 0…100%.
Wind
(air flow)
is another factor influencing the measurement of the object's temperature, as it cools the
surface of an object altering its temperature. Pictures should not be taken in strong wind.
Additionally, to achieve an accurate temperature readout, hold the camera steady. It is recommended to
carry out the auto-calibration of the camera, before starting to capture images.
10 Port connection
10.1 Micro HDMI port
The Micro HDMI interface is mainly used for connecting the external HD monitor. Please ensure that
all monitors to be connected have HDMI ports.
Connect the HDMI cable to the camera.
Let the < HDMI > logo of the Micro HDMI plug facing the front of the device and insert the plug.
Connect the HDMI cable to the HDMI IN port of the HD monitor.
Turn on the HD monitor and switch its video input to select the connected port.
10.2 USB port
View internal storage files
After connecting the USB data cable to the desktop computer, open
My Computer
, check the infor-
mation of the internal storage disk, click to enter the memory device, and find the folder where the
images
are
stored.
The
specific
path
is
…\CAMERA\
internal
storage
device
\DCIM\GCamera\SourceImage.
View the SD card files
If you want to save the images in SD card, please navigate to
Global Settings
►
Information
►
Storage Space
, select SD card as the storage medium, and then files can be saved in the memory
card after photographing.
Connect to the computer with the USB data cable, open
My Computer
, view the information of the in-
ternal storage disk, an
d click to enter the memory device. The path is …\CAMERA\SD card
\DCIM\GCamera\SourceImage
The file name with the initial letters of IRI is the infrared image, and the file name with the
initial letters of VIS is the visible image.
Summary of Contents for KT-560
Page 1: ...USER MANUAL THERMAL IMAGER KT 560 KT 650 KT 670...
Page 2: ......
Page 58: ...KT 560 KT 650 KT 670 USER MANUAL 56 NOTES...
Page 59: ......
