KT-560M
– USER MANUAL
62
NOTE!
Use only the battery, AC adapter and the external battery charger supplied with
the camera.
NOTE!
Do not remov
e the battery from the camera while it’s being charged.
NOTE!
Battery charging should be performed in 0...40°C ambient temperature range.
NOTE!
In order to maintain the proper parameters of the batteries, charging of unused
batteries should be repeated every 3 months.
15.4
Charging the battery in the external battery charger.
NOTE!
Turn the camera off before removing the battery.
To remove the battery from the camera, unlock the security lid by sliding the latch on the
compartment lid (1) and then open the lid by pulling the second latch (2):
Push the battery lock lever above the battery and the battery will partially slide out of the
compartment, allowing to remove it.
Now the battery can be charged in the external battery charger (optional).
To put the battery back into the camera, follow the instructions for removing the battery in
reverse order.