SONEL KT-640 THERMAL IMAGER
10
An additional point indicating the location of the lowest or the highest temperature can be
put onto the screen. Activation and selection of this point can be made in the analysis pa-
rameters settings. (section 8.1).
Functions put together in 4 groups can be selected upon expanding upper drop down
Menu. Analysis Tools options depend on whether the camera displays stored image, fro-
zen image or real time image.
3.4. Menu.
In real-time mode, when there is no icons on the screen, press the Joystick twice or touch
the touch screen once, and then repeat the same on the appearing
icon to make the drop down menu expand. It contains a list of functions, their settings
and parameters. Menu functions are grouped into 4 sections. Navigating through the
Menu is executed by using the Joystick or by the touch secreen.:
Individual functions available on the menu are described in subsequent sections of this
manual.
4. Operation Instructions And The Camera Adjustment
4.1. Turning the camera on/off
Press and hold the (7) button for around 2 seconds to turn the camera on. Splash screen
will apear on the display and then the camera will perform self-check test, after which the
camera is ready to use and goes into displaying real time infrared image.
In order to turn the camera off press and hold the "Power" button until the screen turns off.
Summary of Contents for KT-640
Page 14: ...SONEL KT 640 THERMAL IMAGER 14 Available colour palettes 1 2 3 4 5 6 7 8...
Page 49: ...USER MANUAL 49 3 in the next window select General and then Restart now 4 go to Troubleshoot...
Page 50: ...SONEL KT 640 THERMAL IMAGER 50 5 go to advanced options 6 select Startup settings...
Page 54: ...SONEL KT 640 THERMAL IMAGER 54 And select an option as below...
