LKZ-1500-
LITE ● LKZ-1500 – USER MANUAL
18
4.3
Operating the receiver
Always observe safety rules when you work with live cables.
Do not apply voltage of more than 42 V to the open metal parts or jacks of the Receiver.
If the receiver is at a temperature different from the specified operating temperature, keep it at a work-
ing temperature
– not less than 1 hour before use.
The instrument should be removed from the case and checked for proper covers, and mechanical
damage on the receiver and power supply casing.
Turn off the device with the
button. When powered on, the device turns on the firmware
version number and the supply voltage.
If the voltage is below 5.8 V, recharge
the battery or replace the disposable batter-
ies.
The supply voltage is indicated with the
battery icon while the device is on (
item 15). When the battery is fully charged,
its charge icon is shown full. If the battery is
partially drained, one one half of its charge
icon is visible. If the supply voltage falls be-
low 5.8 V, the battery icon begins flashing.
4.4
Selection and setting the main parameters via Menu op-
tions
Press the button
, to enter or exit the settings.
The menu is navigated with buttons
. The
options may be selected and changed with the
button.
The
Indication
submenu lists the following options.
Fig. 11.
Main menu
Fig. 12
Menu “Indication”
in LKO-1500
Summary of Contents for LKZ-1500
