MIC-05s1
– USER MANUAL
41
Window for entering the measurement result
Successive number /
total number of saved
cells
Note:
- Results of measurements performed for all measuring functions can be stored in one memory location.
- Only the results of the measurements started by pressing
START
button can be stored in the memory
(except autozeroing in low-voltage measurement of resistance).
- Complete set of results (main result and supplementary results) for a given measuring function, preset
measurement settings, date and time of the measurement are stored in the memory.
- Cells unsaved are not available.
- It is recommended to delete the memory after reading the data or before performing a new series of
measurements that may be stored into the same memory cells as the previous ones.
- A single cell may contain either a R
ISO
2(3)p measurement result, a R
ISO
SV, or DD.
- After entering the measurement result, the ID number of the cell is automatically increased.
4.2 Storing the measurement results in the memory
Press
ENTER
after finishing the measurement.
4.2.1 Entering the results without extending the memory structure
Press
ENTER
again.
The cell is free for a given type of
measurement.
