MIC-05s1
– USER MANUAL
53
From the list of available devices select a keyboard and press "ENTER -Connect" - the meter will dis-
play the progress bar, and a counts of 30 seconds. During this time use the keyboard to enter a PIN
code and confirm it by pressing "ENTER".
Note: The PIN code may be read or changed in MENU → Wireless transmission → Change PIN code.
The pairing operation may end in one of three following ways:
- Wireless connection enabled - pairing was successful, the keyboard pairing has been saved in the
memory and will not require re-entering the PIN, even if you change the PIN of the meter. Connection
is indicated by
symbol, displayed near the clock, and it may be seen on the list of available devices*.
From this moment automatic connection is available.
- Wireless connection error Wrong PIN number entered - connection failure. The PIN code entered does
match with the one set in the meter.
