MIC-05s1
– USER MANUAL
32
3.2.6 Damage location (After-burning)
The meter carries out the measurement as for R
ISO
, except that it is not interrupted in the event of
insulation breakdown. In the case of a breakdown the measurement continues, and the damage may
be located as indicated by breakdown sound.
Set the rotary switch of function selection at
. The meter is in the voltage measure-
ment mode.
Use
F1
,
F2
and
F3
buttons to adjust de-
sired test voltage, capacitance of
the object and measurement time,
similarly as in section 3.2.2
or
Start the measurement
by pressing
ENTER
.
Either during, or after the meas-
urement the user can switch be-
tween the text display of the re-
sults and the chart by pressing
F4
.
When insulation breakdown
occurs the meter does not
interrupt the measurement (as in
other functions). The symbol is
shown at the top of the display.
