OPERATING MANUAL MIC-2501 version 1.04
10
or
Press
ENTER
to confirm settings or
press
ESC
to exit without saving the
changes.
Connect test leads according to the drawing.
The meter is ready
for measurement.
Press and hold
START
push-button.
The measurement is performed continu-
ously until you release the button or the
pre-set time is reached.
for 5 sec.
or
+
In order to maintain (hold) the measure-
ment, press and hold
START
button for 5
sec. or press
ENTER
while holding
START
button pressed - symbol
will be displayed indicating
automatic measurement, now the buttons
may be released. The measurement will
end after the longest pre-set time (t1, t2
or t3) runs out. To interrupt or terminate
the measurement earlier in the absence
