OPERATING MANUAL MIC-2501 version 1.04
20
or
Press
ENTER
, to overwrite the re-
sult or
ESC
, to cancel and select
other cell or bank.
Note:
- After the measurement, its result is shown on the display until:
the measurement function is changed,
Auto-OFF function is activated,
the meter detects interference voltage> 50V,
one of the following operations is performed:
o
ESC
button is pressed to exit to the voltmeter,
o
next measurement is performed,
o
an entry into the memory is introduced.
- After exiting to the voltmeter by pressing
ESC
or after saving the results to the memory, the last result
may be recalled by pressing
ENTER
.
- Complete set of results (main result and supplementary results) for a given measuring function and
preset measurement settings are stored in the memory.
5.2 Viewing memory data
Use
<<
or
>>
to browse the memory:
MEM
(LED
is on).
Use
and
buttons to preview the results
stored in the selected cell.
To change the cell number or bank number:
When the cell number is flashing, use
and
buttons to set the desired number of the
cell.
Press
SET/SEL
button
– bank number is flashing.
