OPERATING MANUAL MIC-2501 version 1.04
24
6
Data transmission
6.1 Computer connection accessories
In order to operate the meter with a PC, an USB cable and appropriate software are required. If the
required software has not been purchased with the meter, it may be downloaded from the manufactur-
er's website or purchased form the manufacturer or its authorised distributor.
The software may be used for many devices manufactured by SONEL S.A. which are equipped with
the USB interface or other (depending on the selected device).
Detailed information is available from the manufacturer and distributors.
6.2 Data transmission through USB port
1.
Use
<<
or
>>
to browse the memory:
MEM
(LED
is on).
2. Connect the cable to the USB port of the computer and the USB socket of the meter. The meter will
displays the message:
3. Start the program for communicating with the meter (processing results) and follow the commands of
the software.
7
Software updates
1. In accordance with the guidelines of Section 3 of this manual, enter the meter software update mode:
UPdt
2. Connect the cable to the USB port of the computer and the USB socket of the meter.
3. Start the program for updating the meter and follow the commands of the software.
