24
Notes:
- In case of RCD's the above warning message will appear also when an attempt is made to store a
result of specific measurement (or result component) that has been made at different preset of I
n
current or for a different type of RCD set (standard / short-time delay / selective) than the
measurements the results of which are already stored in this cell, despite the fact that the memory
space designated for this result component may be free. When results of measurements made for a
different type of RCD or a different I
n
current are stored, the results concerning a given RCD that
have been stored previously will be lost.
- Complete set of results (main result and supplementary results) for a given measuring function and
preset measurement settings are stored in the memory.
3.2 Changing the cell and bank number
Press
ENTER
after completion of
the measurement.
The meter is in the memory
storing mode.
The cell number is
flashing.
To change, use
and
buttons.
Press
SET/SEL
.
The bank number is
flashing.
To change, use
and
buttons.
Press
SET/SEL
.
The cell number is flashing again.
3.3 Viewing memory data
Turn on the meter.
Turn the rotary switch
to
MEM
position.
