27
Press
ENTER
to start deleting or
ESC
to abort.
The deletion
progress is shown
on the display as
scrolling bank and
cell numbers.
When deletion is
complete, the
meter generates
two short beeps
and sets the cell
number to 1 and
the bank number
to 0.
3.5 Communication with PC
3.5.1 Computer connection accessories
What is necessary in order to operate the meter with a computer is additional accessories,
namely an OR-1 receiver and appropriate software. If this package has not been purchased along
with the meter, it can be bought from the manufacturer or an authorized distributor where detailed
software information is also available.
3.5.2 Data transmission
Connect OR-1 module to the USB socket of the PC.
Turn on the meter.
Turn the rotary switch
to
MEM
position.
Press
SET/SEL
for about 2 seconds;
the meter will ask you to activate the
radio transmission.
