MRU-200-GPS OPERATING MANUAL Version 1.06
16
3.2 Calibration of the test leads
In order to eliminate the resistance of the test leads, use the auto-zeroing function to compensate
for test lead resistance. The measurement function
2P
includes the
AUTOZERO
sub-function.
3.2.1 Auto-zeroing on
Turn the meter on.
Set the rotary
function selector switch at
2P
.
Press
F1
.
Follow the displayed instructions.
E
S
CA
T
IV
3
00
V
Once the auto-zero compensation
has concluded the following will be displayed:
Auto-zeroing enabled is indicated by
AUTOZERO
shown on the right-hand side of the
display.
