MRU-200-GPS OPERATING MANUAL Version 1.06
39
Drive four probes, equally spaced and in a straight line, into the ground. Connect all 4
probes to the meter, as shown above.
The meter is ready for measurement.
The auxiliary display shows the value of
the interference voltage and its fre-
quency. The settings bar shows the
measurement voltage, mains frequency
set in the
MENU,
and the distance be-
tween the electrodes.
Press
F1
to change the measurement
voltage.
Use and buttons to select the
measuring voltage and press
ENTER
.
Press
START
to begin measurement.
The meter display will first request se-
lecting of the distance between probes.
