MRU-200
● MRU-200-GPS – USER MANUAL
37
3.9
Current measurement (I)
The present function facilitates measurements of the current effective value using measurement
clamp. It may be used for example for the purpose of measurements of the leakage current in the in-
stallation in question. It is possible to choose between several types of clamps, which differ in regard
to diameter and measured current range (see Technical Data).
Turn the meter on.
Set the rotational
function selector at
I
.
Press
F1
to select type of clamp.
Use buttons
and
to select
the type of clamp and press
ENTER
.
Notes:
- Measurements are continuous and there is no possibility of their being saved.
- Flexible clamp F series may be used solely for the purpose of measurements of currents > 1 A.
