MRU-200
● MRU-200-GPS – USER MANUAL
41
4
Memory
The MRU-200 / MRU-200-GPS meters are equipped with a memory whose capacity is 990 re-
sults of resistance measurements. Individual measurements are saved in memory cells. The whole
memory is divided into 10 banks with 99 cells each. Each result may be saved in a cell of a defined
number and in the selected bank, so the user of the meter may, at their own discretion assign num-
bers of the cells to individual measurement points and the numbers of the banks to individual objects,
realize measurements in any order and repeat them without loosing other data.
The memory of the results of the measurements is not deleted when the meter is turned on, so
they may be read further on or transmitted to the computer. The number of the current cell and the
bank is not modified either.
It is recommended to delete the memory once the data have been read or before a new series of
measurements is realized. New measurements may be saved in the same cells as the previous ones.
4.1
Saving of the measurement results in the memory
Once the measurement has finished
press
ENTER
.
Empty cell
Occupied cell
Selection of the measure (cell) is realized by means of the buttons
and
. Bank
May be selected with the buttons
and
. To save press
ENTER
.
Should you intend to save data In an occupied cell, the following message will be dis-
played:
Once the option has been selected with the buttons
and
press
ENTER
.
