MZC-304
– USER MANUAL
21
3.2 Changing the cell and bank number
Press
ENTER
after completion of
the measurement.
The meter is in the memory stor-
ing mode.
The cell number is flash-
ing.
To change, use the
and
buttons.
Press
SET/SEL
.
The bank number is flash-
ing.
To change, use the
and
buttons.
Press
SET/SEL
.
The cell number is flashing again.
3.3 Viewing memory data
Turn on the meter.
Turn the rotary switch
to the
MEM
position.
The content of the last saved cell
appears.
The cell number is flashing.
Use the
SET/SEL
buttons and then
the
buttons to change the
number of the bank and cell which
intent you want to view.
If the bank or cell number is flash-
ing, its number can be changed.
Use the
and
buttons to
view different types of results and
their components.
