3
To start transmission, select Wireless transmission in the MENU or press F1 when the selector
is in the MEM position. The messages will appear in the following order: Establishing RF
connection, and Active wireless connection. If it is impossible to establish connection, the
message Wireless connection lost will appear. Once the connection is established, follow the
instructions from the data storage software manual.
2
Software update
NOTE!
This function may be used only by the computer proficient users.
The warranty does not cover a defective operation of the device resulting from wrong use of
this function.
NOTE!
Do not disconnect the module from the PC during programming.
NOTE!
Make sure that one of the data storage programs with a correct driver is installed on the PC.
Before updating the program, from the manufacturer’s website (www.sonel.pl) download the
software that is used for programming the meter and connect the meter to the computer. Run the
program and follow the prompts.
Read the
information and
check the option: I
familiarized
myself with the
information.
