TDR-410 OPERATING MANUAL version 1.03
6
2 Working principles
TDR-410 measures the time course of the signal (the probe pulse) in a pair from connecting the cable
to the cable end or the nearest damage and back.
Probe pulses in the cable run at a speed Vp (the speed of propagation), which depends on the elec-
trical parameters of the cable, in particular the material from which the insulation is made.
A reflectometer calculates the distance to the disturbance of wave impedance path and displays the
cable's diagram showing any impedance discontinuity in the studied area based on Vp values select-
ed by a user and and measured the course time of the pulse.
3 Preparing the TDR-410 for use
Press button
to power the tester, the following screen will be displayed:
1.
Model.
2.
Software version programmed into tester.
3.
Battery condition indicator (all black battery, fully charged, as charge decreases symbol changes
to white). Battery condition indicator is permanently displayed.
To select a
menu display
, press the left button
as indicated on the TDR-410 front panel:
Output via2x4mm
safety sockets
LCD display
Cursor right key / increase
selected value
Cursor left key / decrease
selected value
START fault location
/ scan hold (for MFL)
Escape / Return
Back light on/off
Power on / off
Navigation button
Summary of Contents for TDR-410
