UV-260
– USER MANUAL
22
- for relatively large interferences, extend the averaging time and simultaneously reduce the
gain level - this will eliminate the noise (background) and accurately determine the appropriate
points of corona discharges.
UV overlay transparency:
set the transparency of UV image overlaid onto the real image (0%
- opaque, 50% - translucent)
Photon counting box
: select the area where discharges are counted (frame with 3 sizes:
large, medium, small).
Brightness
: set the brightness level of the screen, depending on external conditions.
Exit:
return to the main menu.
7.2.3. Video
Provide a set of operations on video files saved on the SD card: view, delete files, and view
detailed information about recorded video files. File names correspond to the dates of their
creation.
7.2.4. Image
Viewing or deleting images saved on the SD card. While viewing images, you can zoom in and
play a voice note (if you previously recorded). Image file names correspond to the dates of their
creation.
The images are displayed in the form of a list or thumbnails.
7.2.5. System
After selecting "System" option, a sub-menu is displayed and the user may change:
- system settings (included in the next sub-menu, as described below),
- time settings,
- factory settings,
- format the SD card,
- display information about the SD card,
- display information about the system.
Fig. 20. System menu.
Summary of Contents for UV-260 Corona Camera
