10 |
P a g e
Setting Output Gain
1.
Set the volume on your radio to between 50 and 75% of
maximum volume.
2.
Set the volume on your headset to its most commonly used
level.
3.
Using a #0 Phillips screwdriver, turn the Output Gain Controller
to its lowest setting (counter-clockwise until it stops).
4.
While activating radio transmit and speaking into the headset
mic (get a helper if necessary), VERY slowly turn the Output
Gain Adjuster clockwise until the volume heard on the radio is
at the desired level.
5.
DO NOT
turn up the Output Gain Controller too quickly.
Adjusting the gains too high will result in poor sound quality,
and could cause your radio to shut down.
Setting Input Gain
1.
Set the volume on your radio to between 50 and 75% of
maximum volume.
2.
Set the volume on your headset to its most commonly used
level.
3.
Using a #0 Phillips screwdriver, turn the Input Gain Controller to
its lowest setting (counter-clockwise until it stops).
4.
While activating radio transmit and speaking into the radio (get
a helper if necessary), VERY slowly turn the Input Gain Adjuster
clockwise until the volume heard on the headset is at the
desired level.
5.
DO NOT
turn up the Input Gain Controller too quickly. Adjusting
the gains too high will result in poor sound quality.
