12 |
P a g e
Because Broadcast Mode Headsets share communication positions,
there can be slight delays in communication. To talk, the Push-To-Talk
button on the headset must be held until a position opens. After a
Broadcast call is made, there will be a pause in which incoming
communications cannot be heard.
To exit Broadcast Mode:
Press and hold 4
or
5 until the link LED flashes slowly indicating pairing
mode.
Tethering ComHubs
SCH305 to SCH310T
Parts needed:
•
(1) Cat.5e Crossover Cable*, any length
•
(1) PR-RJ45 Adapter
Setup:
1.
Attach a PR-RJ45 Adapter to a Cat.5e Crossover Cable using the
instructions included with the PR-RJ45 Adapter.
2.
Connect the PR-RJ45 Adapter to the SCH310T ComHub as per
the PR-RJ45 Adapter instructions.
3.
Connect the free end of the Cat.5e Crossover Cable to the
SCH305 ComHub.
